The World Bank expects global economic growth to slow significantly, from 5.5% in 2021 to 4.1% in 2022 and further to 3.2% in 2023. Growth in East Asia and the Pacific is expected to slow to 5.1 percent in 2022, reflecting the impact of China's economic slowdown, the report said. China's economic growth is expected to fall to 5.1% in 2022, close to potential growth, due to the ongoing impact of the COVID-19 pandemic and the Chinese government's tightening of regulations in certain sectors of the economy. The report said that the rapid spread of the Omicron variant means that the new crown epidemic is likely to continue to disrupt economic activity in the near future. In addition, decelerating growth in major economies, including the United States and China, will depress external demand in emerging markets and developing economies.
Slow economic growth has a huge impact on Nickel-based Alloy.
What is GH4049 (GH49) nickel base alloy?
GH4049 is a nickel-based superalloy, which is an age-hardening alloy. The corresponding grade is GH49. Its nickel content is about 70%. After the alloy is remelted by electroslag or vacuum arc, its processing plasticity can be improved. GH4049 superalloy has good hot and cold working properties. The alloy has good oxidation resistance below 1000 °C high temperature environment, high high temperature strength below 950 °C, small notch sensitivity, good oxidation resistance and fatigue strength. , poor single hot working plasticity
Main processing properties of GH4049 (GH49) nickel-based alloy
Compared with nickel-based alloys of the same kind, GH4049 superalloy has poor hot working plasticity. It is suitable for making gas turbine working blades with a working temperature of 850-950 °C. It is mainly used to make turbine blades for aviation, naval and industrial gas turbines. , high-temperature components such as guide vanes, turbine disks, high-pressure compressor disks and combustion chambers; also used in the manufacture of space vehicles, rocket engines, nuclear reactors, petrochemical equipment, and coal conversion and other energy conversion devices.
The nano-surface crystal layer was prepared on the surface of GH4049 nickel-based superalloy by the treatment process. The effects of different ultrasonic shot peening intensity and shot peening time on its yield strength, tensile strength and microhardness were analyzed. Residual stress distribution of the specimen after nanoization. The research results show that the increase of shot peening time has no direct relationship with the improvement of material strength, and with the increase of shot peening time, the strength of the material will decrease due to the damage of the material surface. After ultrasonic shot peening, the microhardness was significantly improved compared with that of the untreated specimen, and a compressive stress layer of about thickness was formed on the surface of the specimen, and the large compressive stress far exceeded the yield limit of the material.
KMPASS is a trusted global chemical material supplier & manufacturer with over 12 years experience in providing super high-quality chemicals and Nanomaterials. The company export to many countries, such as USA, Canada, Europe, UAE, South Africa, Tanzania,
Kenya,Egypt,Nigeria,Cameroon,Uganda,Turkey,Mexico,Azerbaijan,Belgium,Cyprus,Czech Republic,Brazil, Chile, Argentina, Dubai, Japan, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia,Germany, France, Italy, Portugal etc. As a leading nanotechnology development manufacturer, KMPASS dominates the market. Our professional work team provides perfect solutions to help improve the efficiency of various industries, create value, and easily cope with various challenges. If you are looking for Inconel718 powder, please send an email to: email@example.comD printing technology emerged in the mid-1990s and is actually the latest rapid prototyping device utilizing technologies such as light curing and paper lamination. It is basically the same as ordinary printing. The printer is equipped with "printing materials" such as liquid or powder. After connecting to the computer, the "printing materials" are superimposed layer by layer through computer control, and finally the blueprint on the computer is turned into a real thing. This printing technology is called 3D stereo printing technology.
Titanium alloy Ti6Al4V is a medium-strength α-β type two-phase titanium alloy containing 6% α-stabilizing element AI and 4% β-stabilizing element V.…
Russia and Ukraine is an important exporters of oil, natural gas, metals, fertilizers, rare gases and other industrial raw materials. Affected by the further intensification of the tension of the war, the global market has become more worried about t…
Recently, the EU proclaimed new sanctions on Russia, including coal, timber, rubber, cement, and fertilizer, as well as high-end seafood Bi2S3 powder. The Incas had long added bismuth to a special type of bronze alloy cutting tool, but fo…