Products

  • 0
  • 0

What are the effects of admixtures on foam concrete

Russia and Ukraine is an important exporters of oil, natural gas, metals, fertilizers, rare gases and other industrial raw materials. Affected by the further intensification of the tension of the war, the global market has become more worried about the supply of the foam concrete,foaming agent,concrete curing agent, and panic spreads in the futures market. Prices of commodities such as aluminum and nickel are at recent highs on concerns that supplies will fall. Russia accounts for 49 percent of global exports of nickel, 42 percent of palladium, 26 percent of aluminum and 13 percent of platinum, and is a significant exporter of steel and copper. Palladium is an important metal for sensors and memory. In addition, Russia is the world's largest exporter of nitrogen fertilizer, the second largest exporter of potash fertilizer, and the third-largest exporter of phosphate fertilizer. Ukraine is also an important producer of nitrogen fertilizer. Russia's natural gas supply also has a significant impact on the global fertilizer industry and foam concrete,foaming agent,concrete curing agent industry, especially in Europe. The price of the foam concrete,foaming agent,concrete curing agent will also fluctuate to some extent. Russia carries out crude gas separation, and Ukraine is responsible for refined exports. Ukraine supplies 70% of the world's neon, 40% of krypton and 30% of xenon. These three gases are the materials used to make chips.

To study the problem of collapse mode cracking in the cast-in-place foam concrete wall, using ordinary Portland cement, fly ash, and self-made composite foaming agent as the primary raw materials, the admixtures (there are two kinds of admixtures) were studied through single-factor experiments. One is a foaming agent, and the other is concrete curing agent.


According to the characteristics of the foaming agent that the foam pore size can be adjusted freely, and the preparation is atomized and diluted during use. The pore size is more acceptable and uniform (the pore size is less than 1mm). The light foam and slurry are mixed to make a lightweight concrete microporous slurry. The porosity in the slurry accounts for 70% of the total volume of the foamed concrete. The foams in the slurry are closed by a water film. They are not connected, which improves the problem of high water absorption in traditional concrete and improves the frost resistance and impermeability of foam concrete. It has a specific activation effect on fly ash. 


The slurry in the pouring and forming stage has self-leveling characteristics, good pore structure, smooth entry into the mold, and rapid thickening and forming. Ensure the stability of expansion and improve the strength of foam concrete blocks. Foamed concrete has excellent properties such as lightweight, heat preservation, heat insulation, sound insulation, etc., and it has low production investment. It can use a large amount of industrial waste residue. Its application is of great significance to building energy conservation and environmental protection, so it will gradually replace concrete construction.

According to previous studies, with the increase of fly ash content, the amount of cement decreases, and the early compressive strength of concrete drops significantly. However, fly ash has pozzolanic activity, and in an alkaline environment, with the increase of concrete age, the compressive strength of high-volume fly ash foam concrete will increase significantly. In addition, the large amount of fly ash dramatically reduces the number of harmful pores, improves the compactness of the slurry structure, and is beneficial to the later strength increase.


In recent years, the application of foamed concrete has developed rapidly, but there are still a series of problems in the cast-in-place foamed concrete insulation wall:

(1) Foam concrete has low strength and is not suitable as a load-bearing wall material;

(2) Prefabricated blocks increase the process and engineering costs;

(3) Dry shrinkage of foam concrete and cracking caused by dry-wet cycle and loose structure, due to the problems of collapsed form and easy carbonization due to the influence of pouring height, seriously restrict the broad application of foam concrete.


TRUNNANO is a concrete additives supplier with over 12 years experience in nano-building energy conservation and nanotechnology development. We accept payment via Credit Card, T/T, West Union and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.

If you are looking for high quality foaming agent, please feel free to contact us and send an inquiry.

sales@cabr-concrete.com



Commodities such as crude oil, wheat, cotton, and nickel have rallied since Russia's "special military operations" began in late February. On the last trading day of this quarter, commodities were on track for their biggest gain since 1990. For this reason, it is expected that the price of the foam concrete,foaming agent,concrete curing agent will continue to increase.

Inquiry us

Our Latest Products

Structure of Molybdenum Carbide Mo2C

Molybdenum Carbide, with the chemical formula Mo2C. It has the characteristics of high melting point and hardness, good thermal stability and mechanical stability.…

How is lithium 12-hydroxystearate produced?

Lithium 12-hydroxystearate is widely used in lubricants, stabilizers, bleaching agents, thickeners. Product Name:Lithium 12-Hydroxystearate…

Product Properties of Chromium Oxide Cr2O3 Powder CAS 1308-38-9

Green chrome oxide (Cr2O3 powder) is extremely stable and have excellent weather resistance. It's insoluble in water, acid and organic solvents, slightly soluble in sodium hydroxide solution, only soluble in hot sodium bromate solution, hot concentra…