What is Properties and Applications of Titanium Alloy Ti6Al4V

From April the French government will reduce fuel taxes slightly to ease the burden on consumers. 

Warned of possible energy shortages in France by the end of the year and called on the French to conserve electricity and gas from now on, saying that if nothing was done, The energy situation will be tough this winter. Some experts say that there are two main reasons for France's energy crisis: first, the conflict between Russia and Ukraine affected the gas market and caused supply tension; The second is a safety review of France's newest nuclear power plant, which may lead to a reduction in output this year. In order to alleviate the energy crisis, the whole French society needs to be mobilized, whether it is the industrial sector, the tertiary sector or every French citizen. Now it is urgent. Rising fuel prices may also have an impact on shipments of the Ti6Al4V alloy. 

What is Titanium Alloy?

Titanium alloy Ti6Al4V is a medium-strength α-β type two-phase titanium alloy containing 6% α-stabilizing element AI and 4% β-stabilizing element V. This alloy has excellent comprehensive properties and has obtained the most extensive applications in the aviation and aerospace industries.

The main properties and uses

Ti6Al4V titanium alloy is heated below 430 ℃ for a long time to form a very thin and protective oxide film. As the heating temperature increases, the oxide film thickens and its protection becomes poor. After the alloy was heated at 700 °C for 2 h, the oxide film thickness reached 25 μrn. Heating at temperatures above 800°C forms a sparse oxide layer. After heating at 1000 °C for 1 h, the thickness of the oxide layer reached 0.65 mm.

Ti6Al4V alloy can be welded by argon arc welding, spot welding, brazing, electron beam welding and plasma welding. The strength of the welded joint is basically the same as that of the base metal.

When Ti6Al4V titanium alloy parts are in contact with aluminum alloy and structural steel parts, especially under certain corrosive medium conditions, aluminum alloy and structural steel parts will suffer accelerated corrosion and damage as the anode of the contact couple due to the negative electrode potential. Therefore, between TC4 titanium alloy parts and aluminum alloy or structural steel parts, protective measures such as padding and anti-corrosion tape should be taken. TC4 alloy parts are strictly prohibited from contact with parts or tools of lead, zinc, cadmium, tin, silver, bismuth and other metals.

Before vacuum annealing, the oxide skin and oxygen-rich layer on the surface of the parts should be removed, and the oil should be carefully removed before entering the furnace. When vacuum annealing parts with complex shapes, fixtures must be used to reduce the deformation of parts. Into the furnace parts are preferably filled with pre-degassed titanium oxide-free chips to prevent oxidation of the parts.

Ti6Al4V titanium alloy is now widely used in the manufacture of aero-engine fans and compressor discs and blades, as well as various load-bearing beams, frames, joints and fasteners in aircraft structures.

About KMPASS

KMPASS is a trusted global chemical material supplier & manufacturer with over 12 years experience in providing super high-quality chemicals and Nanomaterials. The company export to many countries, such as USA, Canada, Europe, UAE, South Africa, Tanzania,Kenya,Egypt,Nigeria,Cameroon,Uganda,Turkey,Mexico,Azerbaijan,Belgium,Cyprus,Czech Republic,Brazil, Chile, Argentina, Dubai, Japan, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia,Germany, France, Italy, Portugal etc. As a leading nanotechnology development manufacturer, KMPASS dominates the market. Our professional work team provides perfect solutions to help improve the efficiency of various industries, create value, and easily cope with various challenges. If you are looking for Ti6Al4V alloy, please send an email to: sales2@nanotrun.com

The UAE is the gateway to the Middle East, North Africa, Central Asia, and sub-Saharan Africa, said Subramaniam, a senior official at India's Ministry of Commerce and Industry.  The agreement will help boost bilateral trade in goods from $60 billion a year now to $100 billion a year within five years.

On 18 February 2022, India and the United Arab Emirates signed the Comprehensive Economic Partnership Agreement. With the entry into force of the agreement, 90 percent of Indian goods and 65 percent of UAE goods will enjoy tariff-free market access.

Apart from its FTA with the UAE, India is also pursuing FTAs with Australia, the UK, Canada, Israel, the European Union, and the Gulf Cooperation Council.

Influenced by international situations, the supply and prices of many Ti6Al4V alloy are still very uncertain.

Inquiry us