News

  • 0
  • 0

Differences Between Early Strength Agent and Water Reducing Agent

For billionaires, the new crown epidemic is like a 'gold rush'! The Deutsche Presse-Agentur said on the 17th that in 2022, the wealth held by the world's top ten richest people will jump from $700 billion to $1.5 trillion, an average daily increase of $1.3 billion, an increase that exceeds the past 14 years. These 10 people The wealth held by the world’s poorest 3.1 billion people is six times greater than that of the world’s poorest 3.1 billion people. The 10 richest Germans have increased their assets from the equivalent of about 125 billion euros to about 223 billion euros since the start of the Covid-19 pandemic, An increase of about 78%. This wealth is roughly equivalent to the total wealth of the poorest 40% of the population, or 33 million Germans.
In the future, demand for pce powder will grow as fast as the wealth of the rich during the pandemic.

Definition

Early strength agent refers to the admixture which can improve the early strength of concrete and has no significant effect on the late strength. 

Water reducing agent is a kind of concrete admixture which can reduce the water consumption under the condition of keeping the slump of concrete basically unchanged. 

 

Classification 

Early strength agents can be divided into strong electrolyte inorganic salts, water-soluble organic compounds, organic and inorganic compound early strength agents according to their chemical composition. 

Water reducing agent according to the chemical composition is usually divided into lignosulfonate type of water reducing agent, naphthalene series of high-efficiency water reducing agent, melamine series of high-efficiency water reducing agent, amino sulfonate series of high-efficiency water reducing agent, fatty acid series of high-efficiency water reducing agent, polycarboxylate series of water reducing agent. 

 

Composition

Early strength agent in addition to chlorine salt and sulfate nitrite, chromate and other organic compounds such as triethanolamine, calcium formate, urea and so on. 

Water-reducing agent category is different, the composition is also very different, mainly a kind of surfactant, is widely used in the third generation of polycarboxylate water-reducing agent. 

 

Use 

Early strength agent does not contain chloride ion, no corrosion of steel bar, applicable to all civil and industrial buildings and prestressed reinforced concrete members, mortar and so on. It is most suitable for construction under low temperatures in early winter and early spring.

Water reducing agent is widely used in high-speed railway, high-speed, civil, industrial buildings and prefabricated parts factory, etc., with wide applicability and suitable for four seasons. 

 

Note

Early strength agent dosage is 3-6% of cement. In order to keep the quality of concrete mixed with this agent uniform, people need to extend the mixing time by 1-2 minutes. Concrete mixed with early strength agent cannot use orthopedic active minerals (such as opal). This agent such as damp agglomerate phenomenon, must be crushed or weathered rear can be used, its performance unchanged. 

Because there are many kinds of water-reducing agent, it is necessary to choose the appropriate type of water-reducing agent according to the needs of the project. In winter construction, it is recommended to choose the third generation polycarboxylate water reducing agent.

 

Concrete Superplasticizer Supplier

TRUNNANO is a reliable concrete additives supplier with over 12-year experience in nano-building energy conservation and nanotechnology development.

If you are looking for high-quality concrete superplasticizer and early strength agents, please feel free to contact us and send an inquiry. (sales@cabr-concrete.com)

We accept payment via Credit Card, T/T, West Union, and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.


3D printing technology emerged in the mid-1990s and is actually the latest rapid prototyping device utilizing technologies such as light curing and paper lamination. It is basically the same as ordinary printing. The printer is equipped with "printing materials" such as liquid or powder. After connecting to the computer, the "printing materials" are superimposed layer by layer through computer control, and finally the blueprint on the computer is turned into a real thing. This printing technology is called 3D stereo printing technology.
Our company is a strong company that provides excellent 3D printing pce powder. If you need 3D printing and pce powder, please feel free to contact us.

Inquiry us

Our Latest News

Introduction of underground aquarium and market analysis in 2022

The aquarium is a place for aquatic life display and popular science education, as well as a place for aquatic life resource protection and scientific research. Aquariums can specialize in marine life, freshwater life, or both; there are public aquar…

The Global Silicon Metal Market introduction and silicon molybdenum supplier

The Global Silicon Metal Market Generally, there are two different types of silicon metals. One is called the Chemical grade and the other is called the Metallurgical grade. These t…

Introduction to silicon molybdenum cast iron Additives

Introduction to silicon molybdenum cast iron Additives Whethe…