Answers

  • 0
  • 0

Titanium Nitride (TiN) is an extremely hard ceramic material

Recently, the world's largest investment management corporation, BlackRock, in a market research report said that currently, they prefer U.S. and Japanese equities to European equities because of the energy problem stemming from Russia's invasion of Ukraine.

"Russia's invasion of Ukraine caused terrible injuries, a surge in commodity prices, and food and energy security issues," BlackRock, "It is stifling the economic growth and fulling inflation driven by supply problems. Europe is most affected among those developed markets, as it is trying to wean itself off Russian energy."

The volatile international political situations will continue to affect the markets and prices of many commodities like the Titanium Nitride TiN.

Overview of Titanium Nitride TiN

Titanium nitride TiN (sometimes called Tinite) is an extremely hard ceramic material commonly used as a coating for titanium alloys, steel, carbide and aluminum parts to improve the surface properties of the substrate.

{xunruicms_img_title}

As a thin coating, TiN is used to harden and protect cutting and sliding surfaces, for decorative purposes (due to its golden appearance), and as a non-toxic exterior for medical implants. In most applications, a coating of less than 5 microns (0.00020 inches) is applied.

TiN has a Vickers hardness of 1800–2100, an elastic modulus of 251 GPa, a thermal expansion coefficient of 9.35 × 10-6 K-1, and a superconducting transition temperature of 5.6 K. In normal atmosphere, TiN oxidizes at 800 °C. TiN is brown in color and golden when used as a coating. According to laboratory tests, it is chemically stable at 20°C, but it is slowly attacked by concentrated acid solutions as the temperature increases. The coefficient of friction of TiN to another TiN surface (unlubricated) ranges from 0.4 to 0.9, depending on the substrate and surface finish. Typical TiN formation has a NaCl-type crystal structure with a stoichiometric ratio of about 1:1; however, TiN x compounds with x ranging from 0.6 to 1.2 are thermodynamically stable. TiN becomes superconducting at low temperature, and the critical temperature of single crystal is as high as 6.0 K. Superconductivity in thin-film TiN has been extensively studied, and its superconductivity properties vary from sample preparation to complete suppression of superconductivity at the superconductor-insulator transition. The TiN film was cooled to near absolute zero, turning it into the first known superinsulator, with a sudden 100,000-fold increase in resistance.

Application of Titanium Nitride TiN

A well-known use of TiN coatings is for edge retention and corrosion resistance in machine tools such as drills and milling cutters, often increasing their lifespan by a factor of three or more. Due to the metallic gold color of TiN, it is used to decorate the coating of costume jewelry and automotive trim. TiN is also widely used as a top coat, typically on nickel (Ni) or chrome (Cr) plated substrates for consumer sanitary equipment and door hardware. As a coating, it is used in aerospace and military applications to protect the sliding surfaces of bicycle and motorcycle suspension forks and the shock shafts of radio-controlled automobiles. TiN is also used as a coating for the moving parts of many rifles and semi-automatic firearms. Protective coating as it is very durable. In addition to being durable, it is also very smooth, making it very easy to remove carbon deposits. TiN is non-toxic, complies with FDA guidelines, and has applications in medical devices such as scalpel blades and orthopedic bone saw blades, where sharpness and edge retention are important. TiN coatings are also used to implant prostheses (especially hip replacement implants) and other medical implants.

Although less obvious, TiN films are also used in microelectronics, where they act as conductive connections between active devices and metal contacts used to operate circuits, while acting as a diffusion barrier to prevent metal from diffusing into silicon. In this case, TiN is classified as a "barrier metal" (resistivity ~25 µΩ cm), although it is clearly a ceramic from a chemical or mechanical behavioral point of view. Recent chip designs using 45 nm technology and beyond also use TiN as the "metal" to improve transistor performance. Combined with gate dielectrics with higher dielectric constants (such as HfSiO) compared to standard SiO 2, gate lengths can be reduced while having low leakage, higher drive currents, and equal or better threshold voltages. In addition, TiN films are currently being considered for coating zirconium alloys for fault-tolerant nuclear fuels. Due to their high biostability, TiN layers can also be used as electrodes in bioelectronic applications, such as in smart implants or in vivo biosensors that must withstand severe corrosion caused by bodily fluids. TiN electrodes have been used in subretinal prosthesis projects as well as in biomedical microelectromechanical systems (BioMEMS).

Titanium Nitride TiN Price

The price of titanium nitride TiN products will change randomly with the production cost, transportation cost, international situation, market supply and demand and other factors of titanium nitride TiN products. Tanki New Materials Co., Ltd. aims to help various industries and chemical wholesalers find high-quality products, customized services, low-cost nanomaterials and chemicals by providing a full range of customized solutions. If you are looking for Titanium Nitride TiN products, please feel free to send an inquiry to get the latest Titanium Nitride TiN prices.

Titanium Nitride TiN Supplier

As a global titanium nitride supplier, Tanki New Materials Co., Ltd. has extensive experience in the performance, application and cost-effective manufacturing of advanced and engineered materials. The company has successfully developed a series of powder materials (titanium nitride, silicon nitride, titanium nitride, etc.) high-purity targets, functional ceramics and structural devices, and provides OEM services.

Technical Parameter of Titanium Nitride TiN powder:
Product NameMFPurityParticle SizeSpecific Surface AreaVolume DensityCrystal FormColor
( m2/g )( g/cm3 )
Titanium NitrideTiN99%1-3um, 5-10um7.39 0.19SphericalGray-black
Chemical Composition of Titanium Nitride TiN powder:
TiNNOCFeAlCaSiNi
99.50%21.50%0.6-1.2%0.10%0.02%0.01%0.01%0.30%0.30%


The war in Russia and Ukraine is roiling global financial markets. Russia and Ukraine are important commodity suppliers in the world, so their conflict is bound to make a full impact on the global commodity supply. In view of this, the price of the Titanium Nitride TiN may continue to rise in the future.

Inquery us

Our Latest Answers

Function and overview of titanium carbide TiC powder

Titanium carbide TiC powder is a crystalline solid with gray metallic luster, hard quality, second only to diamond in hardness, and weaker in magnetic properties. For the manufacture of cemented carbide, also used as electrodes and abrasives for arc…

Characteristics of calcium silicide CaSi2 powder

Calcium silicide is used in the manufacture of special metal alloys, for example for phosphorus removal and as a deoxidizer. Calcium silicide is used in the manufacture of special metal alloys, for example for phosphorus removal and as a deoxidizer.…

How is Niobium Carbide NbC powder produced?

Niobium carbide (NBC and Nb2C) is a very hard refractory ceramic material, widely used in refractory high temperature materials and cemented carbide additives.…