Position:Home > TAG > Bearings
  • 5 tips for choosing IKO rolling bearings

    5 tips for choosing IKO rolling bearings

    IKO bearings with relatively low noise When the above two low-noise IKO bearings cannot be used, relatively low-noise bearings can be used. The specific comparison basis is as follows: (1) The noise of ball bearings is lower than that of ba...
  • Features of rolling bearings

    Features of rolling bearings

    Features of rolling bearings 1. The friction coefficient of rolling bearing is smaller than that of sliding bearing and the transmission efficiency is higher. In general, the friction coefficient of sliding bearings is 0.08-0.12, while that...
  • Reasons For Using Insulated Bearings For Motors And Hazards Of Non-Insulated Bearings

    Reasons For Using Insulated Bearings For Motors And Hazards Of Non-Insulated Bearings

    The motor should be rotated with insulated bearings on the non-driving end, because when the motor rotates at a little speed and does not use insulated bearings, shaft voltage and shaft current will be generated, and the bearing flow will ca...
    • Total 1 Page6